HomeProduct Ringbo product description
Ringbo Overview
Product Description1

How to use

  • Turn on the power switch, and press the pedal. Then, move the joysticks forward and backward to operate this product. Since both wheels move individually, the product may rotate at a standstill and you can freely enjoy riding in a small place.
  • If you take off your foot from the pedal, it will stop. If you press the button on a joystick, it will make a sound.
  • If you turn on the sensor switch, the product will stop moving in the direction where an obstacle has been detected along with making a warning sound. In this case, the product will move backward. (E.g. If an obstacle is detected in front, the product will move backward only.) The sensor detects obstacles that are about 30cm away from the sensor and within a range of 45 degrees.
  • The detection range may vary depending on the color or surface texture of the obstacle or the ambient brightness. It is recommended that you use this product in a small place only after turning off the sensor switch.
  • If the power of this product is weakened or the charging LED turns on, connect the adopter to the charging terminal on the back of the product head to recharge it. It requires eight hours to fully charge.
Product Description2

Precautions

  • Do not use this product on roadways, streets, slopes, or in dangerous places.
  • Only use the product on flat terrain.
  • Do not use this product on sand or in bumpy areas.
  • Do not exceed the allowable load. The battery should be recharged by an adult.
  • Operate this product outdoors under parental supervision.
  • Do not replace any wires or parts.
  • Do not use in water. Take precautions to keep water or liquids away from the product.
  • Do not use this product in the rain.
  • If the battery is allowed to become completely flat, it will not be able to be used.
  • Take precautions against the full discharging of the battery.
  • If this product moves slowly, recharge the battery.